![]() Beautiful Interface Who said flashing SD cards has to be an eyesore. There is already "unsafe" mode, there could be a "expert" or "embedded" mode as well. Etcher gives you warnings and hides your system drives by default to avoid accidentally wiping your entire hard-drive. There are too many users which are not familiar enough with command lines, and I'm always a little afraid of telling people to use dd and having someone wipe out their hard drive by accident. There are lots of "embedded" use cases, where you need to be able to pick a file, and write a partition, not the entire drive. It's still a byte-by-byte copy, it's just starting at a the start of partition, not at block 0. I have an SD image (an *.img), which I tell end users to write to the entire card (which leaves the special Intel partition blank), and I would like to tell them they can configure things for their specific Intel SoC, by using etcher (since it's small, cross platform, and end user friendly), but right now I can't. This weird partition thing that Intel does, makes it impossible to make a generic SD image, that can be booted on different hardware platforms without telling end users they need to re-image specific partition on their SD card. This brings me to my problem - I create a standard userspace image that runs on Pi, Xilinx SoCs (Zynq & Zynq Ultrascale), and Intel SoCs (Stratix, Arria and Cyclone). (Intel expects every user to be a developer) This normally isn't a problem for developers, as Intel makes a command line tool called alt-boot-disk-util which does this, but it's part of their giant SoC EDS package, which is licensed, and large. Their developer tools create a preloader-mkpimage.bin file, which end users have to install into a specific partition on an SD Card. Often a clean install is a better option.When a Intel (Altera) SoC boots, the first thing it does, is load a "pre-loader" from a specific partition on a SD Card. īecause of point (5), and that you'll need to create an installation USB anyway, do consider backing up your data and performing a fresh install on your larger drive, then copying your files back over. ![]() (As per oldfred's comment) - If using GPT, you'll need to move the backup partition table to the end of the drive using gdisk (see & Fixing corrupt backup GPT table?). Having never cloned from a drive to a larger drive, I don't know how the system will handle this situation - if anyone has done it please add to comments or edit my answer. ![]() You will then have to expand your partition into the unallocated space (using GParted from a live USB). (5) Do note that if your new drive is larger, dd (and other cloning tools) will create an exact copy of your current drive's structure, and leave the remaining space unallocated - so your drive will not appear any larger and the extra space will be unusable. (4) Double check the syntax before hitting enter! It is a handy tool to have if you want to save a boot image in a flash. It is a hassle-free solution that allows you to burn your chosen OS to an SD card and other removable hard-drives without any complications. (3) If you are going to do this, to be absolutely certain you have the correct source and destination, I'd suggest boot up the system with just one drive in and note its details then add the second drive so you know which is which. balenaEtcher is a recommended app if you are looking for an efficient image burning tool. That means you'll need to use a live USB session. (2) you should unmount the source drive before doing this to ensure the clone is not corrupted by data changes during the process. (1) Back up all important data to an external drive first NOTE: These installation methods only work. If your current drive is /dev/sda and your new ssd is /dev/sdb, the syntax is: Following are instructions on how to setup GParted Live on your USB flash drive using either MS Windows or GNU/Linux. as countless people have warned, dd is a very effective way to destroy your disk / data so do be very careful - in particular with the i and o. I have cloned a HDD to an SSD so I could upgrade to SSD - but both were the same size. There are also other cloning tools that you'd need to install. I've not used balenaEtcher dd is effective for cloning a drive if used carefully and it's installed by default.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |